Using Cleaner Power By the Hour
Clean Energy is Closer Than You Think
With the signing of SB100 by Governor Brown on Monday, California has set the goal of 100% clean energy by 2045. There are a lot of skeptics (and even more supporters), but we’re doing this, and you might as well enjoy it now; 2045 is a long time away. California is already curtailing it’s clean energy production today during certain hours. Most people can take advantage of this natural energy production cycle to use cleaner energy.
California’s leadership on Global Warming is awesome, but more than a decade from now is not fast enough. Californians themselves need to enjoy harvesting cleaner energy through better information delivered in an actionable format.
Don’t Wait Another Day
California’s renewable energy today (September 12, 2018) will range from 20% to 50% of the electric power mix, but it’s a lot cleaner than that. The power mix attributable to fossil fuels dropped to a third of the total demand before lunchtime yesterday. By contrast, two-thirds of the total demand came from fossil-fuel-burning power plants for a few hours after sunset. As we head into Fall, it will get even cleaner, or dirtier, depending on the hour of the day. You can see that California is well on it’s way to meeting it’s goals, but when you use electricity matters, especially as we move transportation to electric power.
Clean energy isn’t just some future goal; you can use it today with the proper information. In January, the State is adopting hourly electric rates that will pass-through the higher costs of operating fossil-fuel burning plants, so if you use cleaner energy, you save money. Choose to take control of your energy and you’ll enjoy using cleaner energy.
The Clean Energy Factor
The Clean Energy Factor describes California’s electric power supply as a single variable. It’s proportional to clean energy production over power coming from fossil fuels.
The Clean Energy Factor is a mathematical expression of the choice you have to use clean energy over power from fossil fuels. California utilities aren’t going to force load management on their customers; the choice is yours.
You can think of there Clean Energy Factor as the opposite of carbon emissions. When the Clean Energy Factor is high, your electric power is cleaner; when it’s low, carbon pollution is high. Enjoy using cleaner energy today. We don’t have decades to solve climate change.
Stay Cool During Wind Power Season
It’s Cooling Season
In the Summer, California’s electric rates are higher in the afternoon when air conditioning loads push demand higher. So here is an easy way to lower your costs by up to One Dollar or more per day and stay comfortable on those Hot Summer Afternoons;
- Know when your peak hours are on your chosen time of use electric rate.
- Know your comfortable temperature setting, i.e. 68 degrees, 72 degrees, or whatever feels comfortable.
- One hour before the start of your peak time period adjust the temperature setting one or two degrees cooler to pre-cool your home. In California, there is now so much solar, this is often a time when the energy supply is very clean.
- If you have a multi-story home, turn off the downstairs air conditioning unit during the peak period. You might leave the fan on to circulate cool air descending from the upper story.
- Around 7 or 8 pm, turn the temperature setting on the air conditioning higher by 2-3 degrees, but leave the fan on. If you time it right, you can avoid that last kWh that needs to turn on each day around 9pm to meet systemwide demand.
The reason we do this is to lower our energy costs, but also to decrease the amount electric power that needs to come from natural gas peaker plants each day. Natural gas peaker plants are the main way that California balances electric power supply with your energy demand. They are expensive, and create more pollution than typical natural-gas-combined-cycle plants that operate over the whole day.
Most modern connected thermostats like the Nest, Ecobee, or the Honeywell Lyric offer a high degree of control, but they often have no way of knowing your electric rate tariff. Utilities sometimes partner with thermostat companies to better manage energy use, but in the case of California, that’s often done by companies like Sabreez. Register and we’ll help lower your bill by up to 20%.
It’s Wind Power Season
California has so much solar now that the hours between 9am and 3pm are often the time of day when energy is cleanest. After the evening peak has passed, wind power is often cranking up to meet overnight power demand. California’s clean energy is abundant and being developed more and more each year, but it’s not always “on.” When it is “on,” electric costs drop, and if you’re not already saving money with a time of use electric rate, you will be in a year and a half when California switches to mandatory time of use electric rates.
Beyond the thermostat, there are a range of methods you can use to decrease the pollution during these hours of the day. Just remember, you don’t have to sacrifice comfort to make the “switch” to cleaner energy.
California’s electric rates are rising, but you don’t have to pay more if you switch to times when energy is cleaner. Using this method and understanding the energy supply is great way to reduce your impact on the environment and save money using cleaner energy.
California’s Wind Power Season is Here!
California’s Energy Supply and Demand
It’s May, and that means it’s the start of Wind Power Season in California. California has worked for years to build a sustainable energy system with solar and wind, and now consumers can start reaping the rewards in terms of air quality, and in terms of lower energy costs. For the year to date, California has curtailed about one-quarter million MegaWatt Hours (MWh) of solar and wind power. If that sounds like a lot, it is and it isn’t. It’s 250 Million kWh of clean energy that could’ve gone into homes like yours if you knew it was there and how to use it. With 11 million homes though, that’s only about 22 kWh per household, or about a day’s worth of electricity for each household. That number will grow each year now, until demand shifts and batteries soak up the good, clean energy.
As California transitions to time of use rates, clean energy costs less and less. Residential customers will transition to time of use rates in 2019, but many can start saving today. Prior to this year, time of use rates offered discounts during the overnight and weekend hours, but these rates have become altered by California’s abundant solar power. California has about 15 gigawatts of solar on both sides of the meter. Now there is a demand spike in the morning, and a larger spike in the afternoon. The size of this spike varies with the seasons. Rates are higher when demand spikes, although current time of use rates only charge more in the afternoon. Electric vehicle owners have even more options with utility rates.
As the interior of California heats up, it creates a natural phenomena that generates wind power. Cold air along the coast is dense and drawn inland towards less dense hot air. The state’s wind farms are located in areas optimal for wind power generation and power transmission in this natural system of air movement. Wind power is strongest during this warm season during the afternoon, overnight, and early morning hours. By contrast, wind power tends to die down during the daytime hours, as the heat builds to start the cycle all over again. It’s quite predictable, though weather and electric power demand can lead to electric price fluctuations.
The Wind Number shows you when your power supply is cleaner and costs less. It’s defined as the ratio of power coming from wind over power from fossil fuels, times 100. A Wind Number of 100 means that equal amounts of your power are coming from wind and fossil fuels, which is pretty clean. The Wind Number takes into account both solar and wind, because when it’s sunny, solar power production reduces fossil fuel consumption. Since solar power is cranking when wind power is dropping off in California on most days, the two renewable energy resources balance each other well, but not perfectly. There is that morning peak in demand, and a much larger afternoon peak in demand. This is the time when natural gas peaker plants are cranking up to meet that demand, and when California’s energy supply is dirtiest and most costly.
How Can I Control When I Use Power?
There are a surprising number of ways to change your home’s load for the better. The easiest is to replace your lighting with LED light bulbs. Using the delay button on your dishwasher or clothes washer is another easy thing to do. Own a pool? Try running the pool pump during the early morning hours, or just after the morning peak. If you have air conditioning, you might try raising the temperature a degree or two when that last natural gas peaker plant is cranking up. That’s when energy is dirtiest (usually around 9 pm in the Summer), and you probably won’t even feel a difference in your comfort. Switching your hot water heater, dryer, or cooktop to gas eliminates their electric power demand, and it’s more efficient. If you do have an electric hot water heater, it can be controlled to heat the water off-peak. As we automate with the Internet of Things in our homes, you’ll be able to hit auto and run your appliances, charge your car, or take other measures to increase your clean energy consumption relative to your fossil fuel consumption. That’s the definition of the Wind Number, and if you contact us, we’ll be happy to tell you more ways to save. Clean Energy Costs Less!